13 CB500F-32MGZA000.book 58 ページ 2012年11月27日 火曜日 午後3時57分
Removing & Installing Body Components
Rear Seat
Ignition key
Seat lock
Rear stays
58
❙
Removal
1. Insert the ignition key into the seat lock.
2. Turn it clockwise, then pull the rear seat
Rear seat
up and back.
❙
Prongs
Installation
1. Insert the prongs into the rear stays on the
frame.
2. Push down on the rear of the rear seat.
Make sure that the seat is locked securely
in position to pull it up lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
compartment under the rear seat.