Dip Switches - Viking K-1705-3 Series Product Manual

A. DIP Switches
Switch 1 Switch 2 Maximum Call Time
OFF OFF
ON OFF
OFF ON
ON ON
Switch 3 Disconnect on Dial Tone
OFF Off
ON On(default)
Switch 4 VOX Switching Speed
OFF Fast, 0.2 sec. (default)
ON Slow, 0.7 seconds
Switch 5 Switch 6 Audio Detection
ON ON
OFF OFF
Switch 7 Auto Answer Position
OFF Automatic answer disabled
ON Automatic answer enabled (default)
Switch 8 Push Button Feature
OFF Connects calls only
ON Connects/disconnects calls (default)
B. Volume Adjustments
1. Microphone
Certain noisy locations (background traffic, machinery or wind) may cause one way talk path (only microphone
audio is heard). In this case, the microphone volume may need to be decreased as shown
2. Speaker
To increase, decrease or turn off the speaker (for monitoring purposes only), adjust the speaker volume control
as shown.
C. Auto-Answer Feature (DIP Switch 7)
With DIP switch 7 in the "ON" position (default), the K-1705-3 will automatically answer the line during the first
incoming ring. This feature is useful for monitoring entrances. In the "OFF" position, the K-1705-3 will not
automatically answer incoming calls.
Programming
Disabled
1 Minute
3 Minutes (default)
9 Minutes
Normal audio detection
Increase audio detect sensitivity for
low level lines. Useful in applications
in which voice or busy signals have
trouble breaking over the speaker.
Microphone Volume
OFF
Rear View of
the K-1705-3

DIP Switches

(shown in default
positions)
6
Speaker Volume
(see section B) (see section B)
OFF
Model: Model: K-1705-3 K-1705-3 Serial No: Serial No: XXXXXXXX XXXXXXXX
Complies with FCC Part 15 and 68 Reg. No: AH3USA-32531-TE-E Complies with FCC Part 15 and 68 Reg. No: AH3USA-32531-TE-E
P/N: P/N: 261102-1 261102-1 DEV: DEV:
REN: 1.0B REN: 1.0B
Viking Electronics, Inc. Viking Electronics, Inc. (715) 386-8861 (715) 386-8861
1531 Industrial St., Hudson, WI 54016 1531 Industrial St., Hudson, WI 54016
8
7
6
5
4
3
2
1
ON OFF
.
RoHS RoHS