Advertisement
Quick Links
Designed, Manufactured and Supported in the USA
VIKING
S E C U R I T Y & C O M M U N I C A T I O N S O L U T I O N S
Vandal Resistant Entry Phones with Built-In
Keypad and 125KHz Proximity Card Reader
The K-1770-3 Series entry phones provide a tough and
attractive handsfree phone for commercial, apartment, and
residential door entry or applications requiring a vandal
resistant speaker phone with built-in 125 KHz Proximity Card
Reader. The card reader outputs industry standard 26-bit
Wiegand data, allowing it to be used with a Viking ES-1 door
controller or any controller compatible with 26-bit Wiegand
format. The K-1770-3 Series entry phones are available in
two attractive finishes: "brushed stainless steel" and "oil
rubbed bronze".
When the "Call" button is pressed, the K-1770-3 returns dial
tone. The keypad may then be used to dial any number. If
no Touch Tone is entered within 8 seconds, CPC is detected,
a busy signal is detected, or the programmable maximum call
time has elapsed, the K-1770-3 will automatically disconnect.
Alternatively, the K-1770-3 may be disconnected by pressing
the "Call" button again. The K-1770-3 comes complete with
a standard, flush mount, rough-in box. In addition, an optional
VE-6x7 weather resistant, surface mount box is available (see
DOD# 424).
Features
• Built-in 125KHz 26-bit Wiegand proximity card reader with LED,
beep card read confirmation, and EWP board protection
• Compatible with the following Viking Proximity Cards and Fobs:
PRX-C, PRX-C-ISO and PRX-FOB (DOD# 198)
• Vandal Resistant Features: 14 gauge louvered 316 stainless
steel faceplate with permanent laser etched graphics, stainless
steel "Call" button, heavy duty metal keypad and T-10 Torx
security mounting screws, scratch resistant powder coating (K-
1770-3-BN)
• Weather Resistant Features: Marine grade 316 stainless steel
faceplate, screws and and push button switch. Switch internally
sealed per IP67. Mylar speaker. Self-draining mic mount.
Faceplate, mic and speaker gaskets. Weather Resisant powder
paint (K-1770-3-BN)
• K-1770 -3-EWP is designed to meet IP66 Ingress Protection
Rating (see DOD# 859 for more information)
• Available in 2 standard faceplate finishes: 316 brushed stainless
steel or oil rubbed bronze powder paint
• Blue "in use" LED
• Telephone line powered
• Volume adjustments for microphone and speaker
• Advanced call progress detection: disconnects on busy signal,
return to dial tone, CPC, reorder tone, maximum call time out and
40 second silence time out
• Selectable auto-answer feature for monitoring
• Selectable push button disconnect
• Zinc plated steel rough-in box with (2) 3/4" conduit knockouts
• Optional VE-6x7 Surface Mount Box available (DOD 424)
• Optional VE-LIGHT to illuminate the front panel at night (DOD 428)
PRODUCT MANUAL
K-1770-3
"Brushed Stainless Steel"
(similar to brushed nickel)
The K-1770-3-EWP shares all of the features of the K-1770-3
in addition to Enhanced Weather Protection (EWP) for outdoor
installations where the unit is exposed to precipitation or
condensation. EWP products feature foam rubber gaskets
and boots, sealed connections, gel-filled butt connectors, as
well as urethane or thermal plastic potted circuit boards with
internally sealed, field-adjustable trim pots and DIP switches
for easy on-site programming. For more info, see DOD# 859.
Applications
• Apartment entry phone when used with the K-1900-3 Apartment Entry Dialer
or C-4000 Apartment/Office Entry Controller or C-3000 Apartment Entry
Controller
• Use with a Viking C-500 to control 1 or 2 (expandable to 8) (DOD 177)
K-1770's and door/gate control on a single phone line
• Use with a Viking C-2000B to control 1 to 4 K-177 0's and door/gate control
on a single phone line (DOD 156)
• Courtesy and customer assistance phone
• Automated teller (ATM) phone
• Use with a Viking ES-1 for proximity card reader door control
• Provide unique front and back door chimes and paging when use with a
Viking SLP-1 or SLP-4 and C-2000B
• Kiosk phone with (100 number speed dialing) when used with the K-1900-9
Multi-Number Dialer (DOD 321)
• Use with Viking's Proximity Cards: PRX-C, PRX-C-ISO, PRX-FOB (DOD 198)
Specifications
Entry Phone Power: Telephone line powered 20V DC/20mA minimum
Proximity Card Reader Power: 5 to 14V DC @ 60mA maximum
Dimensions: Overall: 140mm x 165mm x 66mm (5.5" x 6.5" x 2.6"),
Rough-in box: 114mm x 140mm x 64mm (4.5" x 5.5" x 2.5")
Shipping Weight: 1.6 kg (3.5 lbs)
Environmental: -29°C to 54°C (-20°F to 130°F)
Humidity - K-1770-3: 5% to 95% non-condensing
Humidity - K-1770-3-EWP: Up to 100% condensing
Speaker Volume: Approximately 70 db maximum @1m
Connections: Gel-filled tip and ring connectors
CPC Disconnect Time: 500ms minimum
REN #: 0.5 A
K-1770-3 Series
Entry Phones with Keypads
and Proximity Card Readers
September 27, 2017
K-1770-3-BN
"Oil Rubbed Bronze"
(satin dark brown powder paint
with fine copper metallic)
Advertisement
Related Manuals for Viking K-1770-3
Summary of Contents for Viking K-1770-3
- Page 1 Controller • Compatible with the following Viking Proximity Cards and Fobs: • Use with a Viking C-500 to control 1 or 2 (expandable to 8) (DOD 177) PRX-C, PRX-C-ISO and PRX-FOB (DOD# 198) K-1770’s and door/gate control on a single phone line •...
-
Page 2: Features Overview
* HID and the HID logo are registered trademarks of HID Read Range: 1.25” to 2.0” Global Corporation, an ASSA ABLOY company. All other Technologies Supported: Viking PRX-C, PRX-C-ISO, trademarks are the property of their respective owners. PRX-FOB, certain legacy HID® proximity protocols* and ** AWID is a trademark of Applied Wireless Identification Group. - Page 3 ** Note: The gel-filled (water-tight) butt connectors are designed for insulation displacement on 19-26 gauge wire with a maximum insulation of 0.082 inches. Cut off stripped wire ends prior to terminating. C. Wiring the K-1770-3 Proximity Card Reader IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC outlet and the telephone line.
- Page 4 With DIP switch 8 in the “ON” position (default), the “Call” button alternately connects and disconnects calls. In the “OFF” position, the “Call” button is only used to connect and the K-1770-3 must rely on call progress (busy, return to dial tone, silence time-out, or maximum call time) for an automatic disconnect.
-
Page 5: Operation
The keypad may then be used to dial any number. In the event that the line is busy, the K- 1770-3 will hang-up. The K-1770-3 will also automatically hang up on CPC, silence, busy signal, return to dial tone or time out. If programmed to auto-answer (DIP switch 7 ON), the K-1770-3 will also answer any incoming call. - Page 6 The K-1900-3 converts any Touch Tone phone into a multi-number auto dialer that will store up to 150 telephone numbers in non-volatile memory. Use with Viking’s K-1770-3 phone to provide vandal resistant handsfree or handset communication. When a call initiated by the K-1900-3 is answered by an apartment or business tenant, a built-in contact closure may be activated to control an electric gate or door strike.
- Page 7 * Note: Maximum Wiegand run length is 1000 feet using 24 gauge wire when using the Viking model PRX-1 proximity card reader, 300 feet for the PRX-2 card reader/keypad, 1000 feet for the PRX-3 (using 3 wire pairs for power), and 2000 feet for the PRX-4 keypad.
-
Page 8: Warranty
TWO YEAR LIMITED WARRANTY Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of purchase from any authorized Viking distributor. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016.