Fax Settings > Default fax settings
NOTE
If user login administration is enabled, you can only change the settings by logging in with administrator privileges or
as a user with privileges to configure this setting.
The factory default login user name and login password are set as shown below.
d-COPIA 5001MF
d-COPIA 6001MF
If function default settings have been changed, the [Reset] key can be selected in each function screen to
immediately change the settings.
Refer to System Menu Settings on the following page and configure as needed.
Model Name
Login User Name
Login Password
5000
5000
6000
6000
8-3