Using Convenient Fax Functions > Forward Settings
Changing/Deleting Requirements for Forwarding
To change or delete the requirements for forwarding, follow the steps below.
1
2
Raising the Priority of Requirements for Forwarding
To raise the priority of the requirements for forwarding, follow the steps below.
1
2
Cancelling the Setting of RX/Forward Rules
To cancel the memory forwarding, follow the steps below.
1
2
Display the screen.
Follow steps 1 of "Use Rule for Specific RX" on page 4-21.
Forward only received documents that match the conditions (Use Rule for Specific RX)
Configure the function.
1
Select the requirement name to be deleted or changed.
To delete the requirement name, go to the next step. To change the requirement name, go
to step 3.
2
Select [Delete].
When the confirmation screen is displayed, select [Yes] and go to step 5.
3
Select [Detail].
4
Refer to steps 2 to 4 of "Use Rule for Specific RX" to change the settings.
Forward only received documents that match the conditions (Use Rule for Specific RX)
5
When the deletion or change is completed, Select [OK].
Display the screen.
Follow steps 1 of "Use Rule for Specific RX" on page 4-21.
Forward only received documents that match the conditions (Use Rule for Specific RX)
Configure the function.
1
Select the requirement name to be reprioritized.
2
Select [Raise Priority].
The priority of the selected requirement is raised.
Display the screen.
[System Menu/Counter] key > [FAX] > "RX/Forward Rules" [Next]
Configure the function.
[Off] > [OK]
5-10