Olivetti System 12 Operation Manual page 101

Using Convenient Fax Functions > Forward Settings
• E-mail Subject Add. Info
• FTP Encrypted TX
• File Separation
Forwarding Detail Settings (page 5-11)
2
Select "Storing in FAX Box" [Change].
NOTE
If the forwarding conditions are as follows, Save to FAX Box cannot be configured.
• If "Port" is configured.
• Save to FAX Box cannot be configured for "Others" of a forwarding condition.
3
To store the originals in the FAX Box, select [On]. If you do not want to store the originals in
the FAX Box, select [Off], select [OK] and proceed to step 4-5.
NOTE
To set the FAX Box as the Forward Destination, register the FAX Box in advance.
FAX Box Function (page 5-17)
4
Select the FAX Box to be used to store the originals and select [OK].
If you set the password to FAX Box, enter the password and select [OK].
5
You can change the following settings, and then select [Register].
• Number of Copies
• Enable time setting
• File name registration
Forwarding Detail Settings (page 5-11)
To register another forwarding settings, repeat steps 2-1 to 4-5.
6
Select the checkbox beside the forwarding settings to be enabled from the list.
The checkbox beside the forwarding setting to be enabled is checked.
NOTE
To disable the setting, select the checkbox to delete the checkmark.
7
Select [OK].
The setting is saved by each requirement.
5-8