Initiating The "Test" Sequence; Resetting The Controller To Factory Defaults - Dantherm iA/C T-A6000, iA/C T-B6000, iA/C T-B8000 Product Information Manual

iA/C T-Series Installation, Operating & Maintenance Manual

Initiating the "TEST" sequence

5.5.2
1. Press L button for 2 seconds and release (Display will begin "Display Mode")
2. Press L&R button simultaneously for 2 seconds and release (Display will show "test")
3. Press L button for 2 seconds and release (Display will show test step)
4. TEST steps
STEP
0
1
2
3
4
5
6
5.5.3

Resetting the controller to factory defaults

1. Ensure return temperature is displayed otherwise wait 30 seconds
Press L&R button for 15 seconds and release (Display will show "----")
2.
AC-6 iAC 6K 8K Manual Rev B
DESCRIPTION
Display S/W Revision Level
Int. Fan only
Heater
Int. Fan only
Con Fan
Comp. and cond.
Int. Fan only
INT.
LED HEATER
FAN
X.XX ON OFF
T01 ON OFF
T02 ON ON
T03 ON OFF
T04 ON OFF
T04 ON OFF
T05 ON OFF
COND.
COMP DURATION
FAN
OFF OFF 10 SEC
OFF OFF 30 SEC
OFF OFF 35 SEC
OFF OFF 20 SEC
OFF Cycle 30 SEC
ON ON 75 SEC
OFF OFF 30 SEC
Page 12 of 22