Audio Path - Mitel MiVoice 6930w User Manual

C
USTOMIZING YOUR PHONE
With the Internal Ring setting highlighted press the right navigation key to move to Internal
3.
Ring selection column.
Use the up and down navigation keys to scroll through the list and choose the applicable ring tone.
4.
Press the left navigation key and then the down navigation key to highlight the External Ring setting.
5.
With the External Ring setting highlighted press the right navigation key to move to External
6.
Ring selection column.
Use the up and down navigation keys to scroll through the list and choose the applicable ring tone.
7.
Press the Save softkey to save your changes.
8.

Audio Path

The Mitel MiVoice 6930 IP phone allows you go "handsfree" when handling incoming and outgoing calls
by supporting the use of a headset (Integrated DECT Headset, Bluetooth, USB, analog wired, or
DHSG/EHS wireless) or through speakerphone mode. The Audio Path setting allows you to choose the
initial audio path used when pressing the
options that you can select:
Audio path
Speaker
(Speaker/Headset) key. There are two audio path
Description
The default setting. When using the handset,
pressing the
the phone switches to the speakerphone.
Pressing the
again switches to the headset (if connected).
When using the speakerphone or headset, lift the
handset to switch to the handset.
(Speaker/Headset) key on
(Speaker/Headset) key
A
UDIO
38