ICON Health & Fitness NordicTrack RW600 User Manual page 28

HOW TO ADJUST THE CONSOLE
If the console does not stay in place when it is tilted
upward and downward, first unplug the power
adapter (not shown).
Next, use a stan-
dard screwdriver
to carefully pry
off the Console
Upper Cover (22).
Then, pry off the
Console Lower
Cover (23).
Next, tilt the
Console (6) down-
ward as far as
possible. Tighten
the two indicated
M6 x 16mm
Socket Screws
(96) until the
upward and down-
ward movement
no longer feels
loose.
Then, tilt the
Console (6)
backward as
far as possible
and tighten the
two indicated
M6 x 16mm
Socket Screws
(96).
Then, reattach the Console Lower Cover (23) and the
Console Upper Cover (22).
22
23
6
96
6
96
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, first unplug the power adapter.
Next, remove
the Row Bar (19)
from the Row
Bar Hook (88).
Then, remove the
two M4 x 16mm
Screws (107), and
remove the Upper
Cover (85) from
the rower.
Next, remove the
M4 x 14mm Screw
(93), remove
the Access
Cover (86), and
locate the Reed
Switch (67). Turn
the Flywheel (60)
until a Flywheel
Magnet (81) is
aligned with the
Reed Switch.
Then, slightly
loosen the two
indicated M4 x 12mm Washer Head Screws (119),
slide the Reed Switch slightly closer to or away from
the Flywheel Magnet, and then retighten the Washer
Head Screws.
Plug in the power adapter, and turn the Flywheel (60)
so that the Flywheel Magnet (81) passes the Reed
Switch (67) repeatedly. Repeat the actions described
above until the console displays correct feedback.
When the reed switch is correctly adjusted, reattach
the parts that you removed.
28
19
88
85
107
60
93
86
67
81
119