ICON Health & Fitness NordicTrack RW600 User Manual page 12

12. Orient the Seat (36) as shown and slide it onto
the Frame (1).
Next, attach the Right Rear Stop (16) to the
Frame (1) with two M4 x 16mm Washer Head
Screws (134).
Attach the Left Rear Stop (17) in the same
way.
13. Press the Rail Cap (74) into the end of the
Frame (1). Attach the Rail Cap) with two
M4 x 16mm Truss Screws (107).
14. Plug the Power Adapter (82) into the receptacle
on the front of the rower.
Then, plug the Power Adapter (82) into an
outlet (see HOW TO PLUG IN THE POWER
ADAPTER on page 14).
15. Make sure that all parts are properly tightened before you use the rower. Place a mat under the rower to
protect the floor. Keep the included tools; one or more of the tools may be needed to make adjustments in the
future. Note: Extra hardware may be included.
12
134
36
13
1
107
74
14
12
17
1
16
134
107
82