ICON Health & Fitness NordicTrack RW600 User Manual page 11

9. See the inset drawing. While a second person
holds the Console (6) near the Console Bracket
(7), connect the wire on the Console to the Main
Wire (92). IMPORTANT: The wire connectors
should slide together easily and snap into
place with an audible click. You must connect
the wires correctly for your rower to function
correctly.
Next, carefully insert the connectors on the wires
into the Console (6).
Avoid pinching the wires. Attach the Console
(6) to the Console Bracket (7) with four M6 x
16mm Screws (126); start all four Screws,
make sure that the Console (6) is level, and
then tighten the Screws.
10. Avoid pinching the wires during this step.
Identify the Console Lower Cover (23), which
is marked with a "1." Press the Console Lower
Cover onto the back of the Console (6). Note:
It may be helpful to carefully hit the sides of the
Console Lower Cover with the heel of your hand
to snap it into place.
Then, press the Console Upper Cover (22) onto
the back of the Console (6).
11. Identify the Right Neck Shield (77) and orient it
as shown.
Next, insert the indicated tab (D) on the Right
Neck Shield (77) into the Right Shield (75), and
attach the Right Neck Shield to the Neck (8) with
an M4 x 16mm Machine Screw (104).
Attach the Left Neck Shield (78) in the same
way.
9
6
7
126
10
Avoid pinching
the wires
6
11
104
11
7
6
92
126
Avoid pinching
the wires
2
23
104
8
77
75
D
22
78