NEC Express5800/R120h-1E Manual page 40

(2) In case of non-redundant FAN configuration, there are cases where the screen display of following sensor Health
(vCenter：Status) shows "Warning (Yellow)" after ESXi completes boot, This "Warning (Yellow)" does not indicate
hardware malfunction and there is no impact to the system operation.
- Cooling Unit 1 Fans
(3) There are some cases where the screen display of following sensor Health (vCenter：Status) shows " ? " after ESXi
completes boot, this does not indicate hardware malfunction and there is no impact to the system operation.
- System Chassis 1 UID
● Notes for using TPM in VMware ESXi
If your system has TPM kit (N8115-35) and OS is VMware ESXi with System ROM Version v 2.00 (02/02/2019) or later
and the, should be used "TPM 2.0" in TPM Mode.(*1).
PSOD (Purple Screen of Death) occasionally occurs when TPM Mode is set to "TPM 1.2".
(*1) The factory default setting is "TPM 2.0".
Check TPM Mode and change setting from the following menu.
Menu Location : System Utilities > System Configuration > RBSU > Server Security > Trusted Platform Module
Options
Indicating : Current TPM Type
Settings : TPM Mode Switch Operation
● Change of RAID monitoring and reporting method
If VMware ESXi uses N8103-189/190/191/192/193/194/195/196/201/237/238 RAID controller and N8103-239
SSD Adapter for OS Boot, the RAID monitoring report will be changed to snmp trap reporting.
For details, please check the following website.
NEC Support Portal
http://www.58support.nec.co.jp/global/download/N8103-239/WBEM_uninstall_en.pdf
● Cautions on using Linux OS
Use the device name of LOM or optional NIC which the OS automatically recognizes. When adding a unique udev rule,
do not change or fix the NIC device name based on the PCI address.
In addition, do not use the storage device name under /dev/disk/by-path/ that includes the PCI address.
If operation using a device name based on the PCI address is required, do not add/remove the card to/from the PCI slot,
or change the CPU configuration. If the PCI bus address information changes and the name of the PCI-connected device
is affected, you may not be able to access the network or storage, and the system may not boot normally.
40