Shade for DL Compact 8” Dome Port Product Number 75346 Product Registration Please register your product at ikelite.com within 15 days of purchase. Our product registration database is the best way for us to contact you in the event of a product update.
About this Product Thank you for your purchase of Ikelite equipment. Please read this instruction manual completely before attempting to operate or dive with this product. Please visit ikelite.com to register your product to receive information on any updates, or notices pertaining to your equipment.
Important Notices DO NOT use alcohol, cleaning agents, spray lubricants, » Rain-X, or other solvents on the housing or lens port. Use of an incompatible chemical compound can damage the plastic or component o-rings, which may result in leaking. We recommend detaching the port from the housing and »...
Contents Product Registration About this Product Included in the Box (75344) Included in the Box (75346) Dome Specifications Important Notices Getting to Know Your Dome Port Attaching Your Dome Port and Shade Attaching the Port to a Housing Attaching the Port to an Extension...
3. Clean and lightly lubricate the O-ring. The o-ring needs to be lubricated evenly until it is slightly shiny. Use Ikelite lubricant ONLY. Other lubricants can cause the o-ring to swell and not seal properly. Avoid dry spots or uneven build-up of lubricant.
Page 7
5. The Dome Shade should be aligned and attached as shown. DO NOT overtighten the Dome Shade Set Screws or you may damage the shade. Slowly tighten each set screw so it is snug against the port. Slight movement of the shade is normal after tightening. Dome Shade Thumbscrew Set Screw...
3. Clean and lightly lubricate the O-ring. The o-ring needs to be lubricated evenly until it is slightly shiny. Use Ikelite lubricant ONLY. Other lubricants can cause the o-ring to swell and not seal properly. Avoid dry spots or uneven build-up of lubricant.
5. Tighten each thumbscrew until it stops. DO NOT over-tighten. 6. Attach the complete dome port with extension to your housing. Final Check 1. Submerge the housing with port attached in a fresh water tank dedicated to underwater photography equipment. 2.
Light scratches may be buffed out using NOVUS plastic polish, available in single-use packets or bottles. If the scratches are too deep to polish out, the dome port will need to be returned to Ikelite for replacement of the acrylic dome. Spare Parts for Dome Port •...
Except as mentioned above, no other warranty expressed or implied applies to this Ikelite product. Service and Repairs Ikelite is most interested in performing any service to ensure that all products perform as intended. Evidence of purchase date must be provided to obtain warranty service.
If you have any questions about your product or need advice on getting the images you want, please get contact us and we’ll do everything we can to help you capture your unique perspective. Ikelite Underwater Systems 50 W. 33rd St. Indianapolis, IN 46208 USA (317) 923-4523 ikelite@ikelite.com...