Base with Quick Release Handle
The hard anodized aluminum base plate attaches to your housing with
the two 1/4" nylon washers and 1/4-20 x 3/8" screws.
It is recommended to remove your base with quick release handle and
thoroughly rinse the tray, housing, and hardware periodically.
A central 1/4-20 threaded hole allows attachment of the base plate to
a standard tripod.
The base features additional mounting locations for attachment to a
variety of Ikelite housings (hardware not included).
Accessory Port
This housing features one spare accessory port which may be used
for the attachment of optional third party accessories. This port
accepts fittings designed for a metric M16 threaded hole.
Do not remove or loosen the accessory port plug unless you
»
are installing a compatible accessory.
Tripod mount
9