Table of Contents
Advertisement
About Sync Cords
Connecting a strobe via electrical sync cord provides faster strobe
recycle times as compared to a fiber optic connection, and prolongs
camera battery life.
To connect two strobes to the camera, you must use a dual
»
sync cord.
A second slave strobe may be triggered optically off of a
»
primary strobe connected by sync cord.
Attaching a Sync Cord or TTL Converter
1. Remove connector protectors and bulkhead caps from each
connection.
2. Apply a very thin, even layer of lubricant on all threads, sealing
surfaces, and the exposed portion of the plug o-ring. Do not allow
lubricant to get into the pins and receptacles of the plug or
bulkheads.
Bulkhead
cap
Bulkhead
Retaining
ring
21
Advertisement
Table of Contents
