Advertisement
Use of the on-camera control menu
requires a video monitor or viewfinder
to be connected to the camera.
O N - C A M E R A C O N T R O L S
Vision Research, Inc. | Phantom T-Series Camer a Manual
A
TRIGGER
When camera is in capture mode (writing to internal RAM), button glows red. A single tap will trigger
the camera. When a Cine is captured, the button glows green.
When in video playback mode, tap the trigger button to exit the menu.
When the menu is active, tap the trigger button to go live.
To clear the RAM recording and re-enter capture mode, hold down trigger button for four seconds.
B
MENU
Tap the menu button to activate the camera's menu system as described on the following pages.
Turn the knob to navigate through the menu, and tap to select. Exit the menu by waiting 10 seconds or
tapping the Trigger button
C
PLAYBACK
Tap to enter playback mode when a cine is stored in RAM. Playback buttons will glow green when
camera is in playback mode.
D
TOOLS
In Live mode, a tap of the Tools button will cycle through video zoom levels (for focus assist) and
threshold (exposure assist).
When in playback mode, the play-backward symbol is illuminated and this button is used to play
reverse. A long press will do a fast-reverse. Tap to pause.
E
B-REF
In live mode, a long press of the B-Ref button will perform a Current Session Reference (CSR).
When in playback mode, the play-forward symbol is illuminated and this button is used to play
forward. A long press will do a fast-forward. Tap to pause.
Chapter 4: On-Camera Control s | 13
Advertisement
