Advertisement
PRE-INSTALLATION
Phantom Camera Control (PCC) software operates with Microsoft Windows 10.
The computer and cameras must be associated with the same sub-network to
communicate with one another. Typically, the IP address 100.100.100.1 and subnet
255.255.0.0 are defined to the control computer's network card.
When multiple computers are used to control the same camera, each computer
requires a unique IP address.
For example, 100.100.100.1 (255.255.0.0), 100.100.100.2 (255.255.0.0), and so on.
P C C S O F T W A R E
Vision Research, Inc. | Phantom T-Series Camer a Manual
The latest version of Phantom PCC software can
be downloaded from the Vision Research website:
www.phantomhighspeed.com/pcc
This manual covers the most commonly used
functions. See the 'PCC Help' file for details of
other settings.
PHANTOM CAMERA CONTROL (PCC) APPLICATION OVERVIEW
TOOLBAR
The 'Toolbar' buttons provide quick access to the most frequently used functions.
In the program, hover over a button to display a text box briefly describing its function.
The 'Help' options provide valuable reference information, along with
extensive documentation, relating to the software. Online tutorials can
be found at www.phantomhighspeed.com/tutorials.
CONTROL TABS
PCC provides three control tabs: 'Live,' 'Play' and 'Manager.'
When first started, the 'Manager' tab is selected. Connected
cameras are selected for use and naming in this tab. It is
also used to manage saved Cine files.
All camera control and capture parameters (sample rate,
exposure time, etc.) are performed in the 'Live' tab.
Reviewing, editing and saving of Cine files, either from the
camera's internal RAM memory, installed Phantom CineMag
V or external hard drive, are performed in the 'Play' tab.
Chapter 6: Phantom PCC Soft ware | 27
Advertisement
