Advertisement
ON-SCREEN DISPLAY (OSD) OVERVIEW
The On-Screen Display (OSD) provides valuable information about the camera's
current status over the video outputs along with the live or playback images.
VIDEO DISPL AY, 'LIVE' MODE
A
B
C
G
VIDEO DISPL AY, 'PL AYBACK' MODE
I
J
A
CAMERA STATE
The symbol changes based on the camera's state:
Live: The camera is not recording and a live image is displayed from all SDI ports.
Capture: The camera is recording to internal memory (RAM) and awaiting a
trigger signal.
Triggered: The camera has been triggered and is filling RAM memory
('Post-Trigger' frames).
Cine Stored: Recording has ended and a Cine is stored in RAM memory. The Cine
must be erased from the RAM to begin recording again.
Playback: The camera is in 'Playback' mode. RAM Cines can be reviewed, edited
and saved to flash.
Vision Research, Inc. | Phantom T-Series Camer a Manual
B
TIMECODE
Indicates the IRIG timecode stamped to each frame.
C
BUFFER BAR WITH TRIGGER POINT
This 'timeline' represents all frames available in camera RAM ('Loop' mode). The 'T' indicator
represents the user-defined trigger point.
D
F
D
FRAME COUNT & DURATION
Displays the frame count and recording time based on the current camera settings.
E
E
FLASH MEMORY STATUS
Indicates the memory size of the Phantom CineMag (if present) and the total recording time available.
F
EF LENS APERTURE DATA
Displays the f-stop (aperture) the lens. Valid for Canon EF mounts only.
G
CAMERA NAME
Indicates user-defined camera name. If not defined, the camera serial number is displayed.
H
H
CAPTURE SETTINGS
Shows frame rate, exposure time and resolution.
I
CINE INDICATOR
L
Indicates the Cine number selected for playback.
K
J
PLAYBACK TIMECODE
A visual representation of the Cine timeline with the trigger (T) point, mark-in and mark-out (|) points,
and play head indicated.
K
PLAYBACK BAR
Shows the timestamp of each frame in IRIG format and the current frame number.
L
PLAYBACK
Frame count and playback duration based on current video settings, within the mark-in and mark-out
points.
Chapter 4: On-Camera Control s | 15
Advertisement
