Table of Contents
Advertisement
PRODUCT SAFETY WARNINGS
Overflow valve with pressure switch
The overflow valve prevents the permissible working
pressure from being exceeded. If the lever on the trigger
gun is released the pressure switch turns turns the pump
off and the high-pressure washer stops. If the lever is
pulled the pump is turned on again.
Flow monitors
DO NOT alter the original diameter of the spray head
nozzle - HAZARDOUS ALTERATION OF OPERATING
PERFORMANCE.
Attention!
Connecting to mains power supply.
Connecting the high pressure washer to a supply
system,the max allowed impedance is 0.371 OHM.
Consult with the supply authority that the equipment is
connected only to a supply of that impedance or less.
SYMBOLS
Safety symbols
The purpose of safety symbols is to bring your attention
to possible dangers. The safety symbols and explanations
require your careful attention and full understanding. The
symbol warnings do not, by themselves, eliminate any
danger. The instructions and warnings are not substitute
to accidents prevention measures.
16
SYMBOLS
WARNING: Be sure to read and understand all
safety instructions in this operator's manual,
including all safety alert symbols such as
"DANGER", "WARNING", and "CAUTION" before
using this tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious personal injury.
SAFETY ALERT SYMBOL: Indicates DANGER,
WARNING, or CAUTION. May be used in conjunction
with other symbols or pictographs.
Symbol meaning
This page depicts and describes safety symbols that may
appear on this product. Read, understand and follow
all instructions on the machine before attempting to
assemble and operate.
To reduce the risk of injury, user must read
instructions manual carefully.
WARNING: Never direct discharge stream
at persons, animals, the unit or any other
electric components.
17
Advertisement
Table of Contents
