Midea MH90A3200W-ES Instruction Manual page 11

LIGHTING
LIGHT REPLACEMENT
1.5W LED light.
Switch off the extractor hood and isolate the extractor hood by pulling out the

mains plug or switching off the fuse.
Remove the grease filter.

Remove the light by levering its fitting from the hood body(this may require

pressure or force to be applied).
Self-ballasted
LED modules
 Disconnect the connector of the light.
 Replace the light with a new one of the same type,
making sure that you connect the light with the
light cable correctly.
 Reinstall the light back to the hood body.
DC 12 V
11
B
/