Table of Contents
Advertisement
Available languages
Available languages
PRODUCTSPECIFICATIONS
Motor ...............................................................
19.2VoltDC
BladeDiameter .......................................................
6-1/2in.
Blade Arbor...............................................................
5/8 in.
CuttingDepth at0°...............................................
2-1/16in.
CuttingDepth at45°.............................................
1-7/16in.
NoLoadSpeed ..................................................
4,700/min.
KNOWYOURCIRCULARSAW
See Figure 1, page L
The safe use of this product requires an understanding
of the information on the product and in this operator's
manual as well as a knowledge of the project you are
attempting.
Before use of this product, familiarize yourself
with all operating features and safety rules.
BEVEL ADJUSTMENT
The bevel adjustment allows you to set the circular saw for
bevel cuts from 0° to 50 °.
BLADE WRENCH
STORAGE
Convenient wrench storage for quick blade changes.
DEPTH
LOCK
KNOB
The depth lock knob adjusts the depth of cut from 0 in. to
2-1/16 in.
LOCK-OFF
BUTTON
The lock-off
button reduces the possibility
of accidental
starting.
SPINDLE
LOCK
BUTTON
The spindle lock button allows you to secure the blade when
turning the blade screw.
WIDTH
OF CUT SCALE
When making straight cross cuts or rip cuts, the scale can
be used to measure up to 4 in. on the right side of the blade,
and up to 1 in. on the left side of the blade.
UNPACKING
This product requires assembly.
•
Carefully remove the tool and any accessories from the
box. Make sure all items listed on the box are included.
A
WARNING:
Do not use this product if any parts
on the Packing List are already assembled to your
product when you unpack it. Parts on this list are not
assembled to the product by the manufacturer and
require customer installation. Use of a product that
may have been improperly assembled could result in
serious personal injury.
•
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
•
Do not discard the packing material until you have
carefully inspected and satisfactorily
operated the tool.
•
If any parts are damaged or missing, please call
1-800-932-3188
for assistance.
PACKING
LIST
Circular Saw
6-1/2 in. Blade
Blade Wrench
Operator's Manual
_,
WARNING:
If any parts are missing do not operate
the tool until the missing parts are replaced. Use of
this product with damaged or missing parts could
result in serious personal injury.
A
A
WARNING:
Do not attempt to modify this tool
or create accessories not recommended
for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
7 - English
Advertisement
Table of Contents
