Beamwidth And Directivity - Toa H-2WP Brochure & Specs

H SERIES SPECIFICATIONS
Enclosure Type
Speaker Components
Impedance
Sensitivity (1 W / 1 m, 1/2 space) H-1: 85 dB SPL / H-2/H-2WP: 88 dB SPL
Power Handling
Continuous Program:
Continuous Pink Noise, 24 Hrs: H-1: 30 W / H-2/H-2WP: 40 W (4 Ω)
Transformer:
Frequency Response
Crossover Frequency
Material / Finish
Trim Piece:
Adapter Panel:
Grille:
Grille Frame:
Base Frame:
Input Connector
Accessories
Dimensions (W x H x D)
Weight
NOTE: All specifications are subject to change without notice.
Architect's & Engineer's Specifications
The loudspeaker shall be a two-way, sealed enclosure suitable
for wall or ceiling mounting with an external appearance that
is aesthetically pleasing and blends well with surrounding
building architecture and fixtures. Loudspeakers requiring visi-
ble external mounting brackets shall not be acceptable.
The loudspeaker shall utilize high quality components. The
high frequency component shall be a 1" balanced dome
tweeter, Ferrofluid-cooled for high power handling, The low
frequency component shall be a 3" x 2" (H-1) / 4" (H-2/
H-2WP) cone woofer with Neodymium magnet for improved
low frequency response. The speaker shall employ a high
quality internal passive crossover circuit with optimized filter
slopes and a crossover frequency of 5k Hz.
The loudspeaker shall have a smooth frequency response
from 120 to 20k Hz (H-1) / 100 to 20k Hz (H-2/H-2WP). The
output sound pressure level at a distance of 1 meter with 1 W
of input power applied shall be 85 dB SPL (H-1) / 88 dB SPL
(H-2/H-2WP). The rated power handling (Continuous Program)
shall be 90W (H-1) / 120 W (H-2/H-2WP) (4 Ω) and 12 W
with matching transformer (H-1/H-2/H-2WP).
The loudspeaker shall be compatible with low and high
impedance speaker systems and shall include a built-in
70.7/100 V matching transformer with the following selec-
Sealed, two-way
H-1: 3" x 2" cone woofer (Neodymium magnet)
H-2/H-2WP: 4" cone woofer (Neodymium magnet)
H-1/H-2/H-2WP: 1" balanced-dome tweeter
(Ferrofluid-cooled)
Direct: 4 Ω
Transformer: 16 Ω
70.7 V line: 12 W (420 Ω), 6 W (830 Ω), 3 W (1.7k Ω),
1.5 W (3.3k Ω)
100 V line: 12 W (830 Ω), 6 W (1.7k Ω), 3 W (3.3k Ω)
H-1: 90 W / H-2/H-2WP: 120 W (4 Ω)
H-1/H-2/H-2WP: 12 W (16 Ω – 3.3k Ω)
H-1: 120 to 20k Hz
H-2/H-2WP: 100 to 20k Hz
5k Hz
H-1: Fire-resistant ABS resin (UL94: V-0 grade), white
H-1: Rolled steel plate
H-1/H-2: Rolled Steel plate, white, paintable
H-2WP: Stainless steel, white, paintable
H-2: Fire-resistant ABS resin (UL94: V-0 grade), white
H-2WP: AES resin, white
H-2: Rolled steel plate / H-2WP: Stainless steel
Removable terminal block with screw terminals, 2 pairs
of (+)/(-) for input and loop-through terminations using
AWG #14 – #24.
H-1: Adapter panel (model HY-H1) (fits RACO #953 or
equivalent), Cutout template, Mounting screws
H-2/H-2WP: Base plate, Mounting screws
Optional EQ modules: E-04R (H-1) / E-05R (H-2/H-2WP)
H-1: 12.28" x 4.96" x 3.54" (312 mm x 126 mm x 90 mm)
H-2/H-2WP: 10.55" x 4.37" (268 mm x 111 mm)
H-1: 3.31 lbs. (1.5 kg) (including adapter panel)
H-2/H-2WP: 4.63 lbs. (2.1 kg) (including base frame)
table tap settings: 12 W, 6 W, 3 W, 1.5 W (70.7 V) and 12 W,
6 W, 3 W (100 V). The speaker shall also have selectable
impedance settings of 4 Ω and 16 Ω.
The loudspeaker shall include a removable terminal block
connector, screw terminal type, with loop-through terminations
and accept AWG #14 - #24.
An internal protection circuit shall prevent damage to com-
ponents in an overload condition. Once activated, the circuit
shall reduce the input signal and reset automatically after
approximately thirty seconds once overload condition is
removed.
The loudspeaker grille material shall be rolled steel plate
(H-1/H-2) / stainless steel (H-2WP) with a paintable white fin-
ish. The loudspeaker trim piece (H-1) shall be constructed of
fire-resistant ABS resin with a paintable white finish. The loud-
speaker grille frame shall be fire-resistant ABS resin (H-1/H-2)
/ AES resin (H-2WP) with a paintable white finish.
The unit shall be compact and lightweight with dimensions
of 12.28" W x 4.96" H x 3.54" D (312 mm x 126 mm x 90
mm) (H-1) / 10.55" x 4.37" H (268 mm x 111 mm) (H-2/
H-2WP). The speaker shall weight 3.31 lbs. (1.5 kg) (H-1) /
4.63 lbs. (2.1 kg) (H-2/H-2WP).
The loudspeakers shall be the TOA H-1 / H-2 / H-2WP.

Beamwidth and Directivity

H-1
H-2/H-2WP
TOA Electronics, Inc.
Phone: 800-733-7088 Fax: 800-733-9766
Web Site: www.toaelectronics.com
TOA Canada Corp.
Phone: 905-564-3570 Fax: 905-564-3569
Printed in USA 4/99/G © 1999 TOA Electronics, Inc.