Step 3
Configure the parameters.
Parameter
Rec No.
Register Password
Build No.
Unit No.
IP Address
Username
Password
Step 4
Click Save.
5.1.2 Modifying VTO Information
The VTO that is currently at use cannot be modified or deleted.
Step 1
On the VTO No. Management interface (Figure 5-1), click
Figure 5-2
Add VTO
Table 5-1 Add VTO configuration
Description
The VTO number you configured for the target VTO. See the details
in "Table 4-1."
Keep default value.
Available only when other servers work as SIP server.
The IP address of the target VTO.
The user name and password for the WEB interface of the target
VTO.
14
.