Table of Contents
Advertisement
4.2
Video & Audio
This section introduces how to configure the format and quality of video that captured by VTO,
and the audio control settings.
Step 1
On the main interface (Figure 3-1), select Local Setting > Video & Audio.
Step 2
Configure parameters, and these configurations will take effect immediately.
Parameter
Main
Stream
Figure 4-2
Figure 4-3
Table 4-2 Video parameter description
Description
Video Format
Select the video resolution from 720P, WVGA, and D1.
Configure the number of frames in 1 second. You can select
Format Rate
from 1 to 25 under PAL, and 1 to 30 under NTSC video
Faç ade layout
Video & audio
7
Advertisement
Table of Contents
