Remove The Carrier Assembly From The Heatsink - Supermicro SuperServer 620BT-DNTR User Manual

Chapter 3: Maintenance and Component Installation

Remove the Carrier Assembly from the Heatsink

To remove the processor carrier assembly from the PHM, please follow the steps below:
1. Detach the four plastic clips (marked a, b, c, d) on the processor carrier assembly from
the four corners of the heatsink (marked A, B, C, D) as shown below.
d
Processor Carrier Assembly
Pin1
Pin1
b
a
D
c
A
B
Heatsink
C
2. When all plastic clips have been detached from the heatsink, remove the processor
carrier assembly from the heatsink
42