Table of Contents
Advertisement
C.2 Enabling NVMe RAID
RAID for NVMe SSDs must be enabled through the UEFI BIOS.
1. Install the patch as described in the Restrictions and Requirements section on a
previous page.
2. Reboot the server.
3. Press [DEL] key to enter BIOS.
4. Switch to Advanced > Chipset Configuration > North Bridge > IIO Configuration >
Intel VMD Technology > Intel VMD for Volume Management on CPU2.
5. Enable the VMD.
6. Press [F4] to save the configuration and reboot the system.
7. Press [DEL] to enter BIOS.
8. Switch to Advanced > Intel® Virtual RAID on CPU > All Intel VMD Controllers >
Create RAID Volume.
9. Set Name.
10. Set RAID Level.
Figure C-2. BIOS VMD Settings
121
Appendix C: CPU-based RAID for NVMe
Advertisement
Table of Contents
Troubleshooting
