3. Locate the lever on the processor socket and press it down as shown below.
4. Using pin 1 as a guide, carefully align the CPU keys on the processor (A & B) with
those on the carrier (a & b) as shown below.
5. Once aligned, carefully place one end of the processor under latch 1 on the carrier, and
then press the other end down until it snaps into latch 2.
Processor Carrier Assembly
(Top Side View)
Chapter 3: Maintenance and Component Installation
B
CPU Key (on the
processor)
CPU Key (on
b
the carrier)
2
Latch
36
Lever
Latch
1
A
CPU Key (on the
processor)
a
CPU Key (on the
carrier)
Processor Carrier Assembly