Table of Contents
Advertisement
Step 6. Securing the dishwasher
1. Pull out the upper basket, and the centre bas
ket if present, and turn the basket stop on the
runner outwards.
2. Remove the upper basket, and the centre
basket if present, by pulling the basket(s)
out as far as possible. This is to make more
space available during installation.
3. Remove the lower basket. Otherwise it easily
rolls out if you need to adjust the dishwasher
during installation.
4. Connec. Screw the dishwasher to the work
top from the inside or to the
side. If the worktop is a hard material, such
as marble, screw the dishwasher to the side
cabinets. Use the supplied plastic spacers
when screwing the dishwasher into place!
cabinets
on either
Advertisement
Table of Contents
