Press Start/Stop
The dishwasher will now start. It manages the
entire wash automatically. Ensure that the door
is properly closed or the machine will not start.
Changing options
If you want to change program after having
started the machine, press the Start/Stop button
for three seconds. Then select a new program
and then press the Start/Stop button again.
Do you want to load more dishes?
Carefully open the door; the machine will
stops automatically, put in the dishes, close
the door and the dishwasher will continue
from where it left off.
If the machine is switched off from
the main switch
(or in the event of a power cut) before the wash
ing program has been completed, the inter
rupted program will continue when power comes
back on.
NB!
If the power is switched off, or if the door is open
for more than 2 minutes during drying, the pro
gram isinterrupted.
7
After dishwashing
Once the machine has finished, it only draws
standby current. Turn off the water faucet if the
machine is not to be used for an extended pe
riod, such as during vacations, for example.
Drying
For additional drying the door should be opened
35 mm upon completion of the drying cycle. For
more information refer to the page marked Per
formance Information in these instructions.
1