Table of Contents
Advertisement
Settings
Setting water hardness
If you have a dishwasher with a water softener, you may need to change the setting, depending
on the degree of hardness of the water. Phone your local Water Board to check the water hard
ness in your area. The dishwasher is set for low water hardness on delivery.
START
+
STOP
PROG
PROG
*
* All program indicators extinguished: Machines without
water softeners and machines with water softeners and
low water hardness.
START
STOP
Switch off the dishwasher with the main switch.
1
Hold in the Start/Stop and Drying buttons at the same time
2
as pressing the main switch. Release the Start/Stop button.
Press the Program button from one to six times depending
3
on the hardness of the water. Program symbols will light up
as you press. See illustration.
Setting water hardness
*
*
*
Press the Start/Stop button and the setting will be stored
4
until next time you want to make a change.
˚dH
*
*
0-5
6-8
9-14
15-19
20-29
30-44
45+
˚fH
0-9
9-14
15-25
26-34
35-52
53-79
80+
Advertisement
Table of Contents
