Table of Contents
Advertisement
Adjusting the door springs
4. Adjust the spring tension using one of the
following methods depending on how much
adjustment is needed.
If you need to adjust the spring a lot, place
the rear mount in another hole. Place the
spring further forward to reduce the tension
and further back to increase the tension.
If you want to make small adjustments to the
spring, hold the back end with one hand and turn
the forward mount clockwise or anticlockwise
one or more times. Turn the mount clockwise
to increase spring tension and anticlockwise to
reduce spring tension.
5. Replace the back end of the spring by hol
ding the spring at a right angle to the side of
the dishwasher and pushing the end of the
spring into the hole, then turning the spring in
towards the dishwasher.
6. Reattach the front end of the spring by pul
ling it up and forward to fasten it in the mount.
7. Open the door and check the spring tension
again. If necessary, make further adjust
ments as above.
Stronger door springs are available for purchase
for dishwashers fitted with a cover door. Springs
are available for various weights and sizes of
door. Door springs can be purchased from the
retailer who sold you the dishwasher.
Increase spring tension
6
Reduce spring tension
5
Advertisement
Table of Contents
