Table of Contents
Advertisement
Step 1. Fitting the dishwasher in place
1. Loosen the locking nuts on the dishwasher's
two front steel feet using a 16 mm openen
ded spanner. Screw the locking nuts down
as close to the floor as possible.
2. Adjust the height of the dishwasher by
turning the front steel feet with your hands.
Leave enough space to adjust them later.
3. Screw in the back foot completely by turning
the adjustment screw at the front anticlock
wise. Use a flatbladed screwdriver or an
Allen screwdriver.
Advertisement
Table of Contents
