Displaying Data From A Memory Card - Furuno GP-3500F-D Operator's Manual

10. RECORDING & PLAYING BACK DATA
10.2.3

Displaying data from a memory card

Tracks and marks in a memory card can be displayed on the screen as follows.
1. Insert a memory card into the left slot.
2. Press the [MENU] key to show the main menu.
3. Press the [3] key to show the MEMORY CARD OPERATIONS & DATA
TRANSFER menu.
4. Press the [3] key to show the DISPLAY DATA FROM MEMORY CARD menu.
Note: If an empty memory card is inserted, a beep sounds at step 4
5. Rotate the [ENTER] knob to select a file to load.
6. Press the [ENTER] knob to show "YES" at the DISPLAY column.
7. Repeat steps 5 and 6 to load other files.
Note: To escape, press the [ENTER] knob to select "NO."
8. Press the [MENU] key several times to close the menu.
Tracks and marks are displayed on the screen. These data can not be edited or
erased.
10-6
3-3. DISPLAY DATA FROM MEMORY CARD
FILE NAME
FILE 1
FILE 2
TURN KNOB TO SELECT FILE.
PRESS KNOB TO DISPLAY DATA.
Display data from memory card
operation.
TRACKS MARKS DISPLAY
120 20 NO
916 0 NO