Furuno GP-3500F-D Operator's Manual page 107

Skipping route waypoints
In some instances you may want to "skip" waypoints while following a route. In
the figure below, for example, the vessel has decided to navigate from waypoint
05 to 03, skipping waypoint 04.
PORT 1
PORT 2
1. Press the [MENU] key to show the main menu.
2. Press the [2] key to show the ROUTES LIST.
3. Rotate the [ENTER] knob to select a route.
4. Press the [ENTER] knob three times to show the waypoints list.
5. Rotate the [ENTER] knob to select the waypoint you want to skip.
6. Press the [CURSOR ON/OFF] key to show "-" next to the waypoint selected
at step 5.
000002
NO. WPT
1 000001 34 44.041'N 135 21.255'E 0.00nm 0.0H
2 -000002 34 44.237'N 135 20.936'E ---.--nm -----.-H
3 000003 33 43.878'N 134 20.049'E 1.00nm 0.1H
4 ------
Skipped waypoint
Note: To restore the waypoint, press the [CURSOR ON/OFF] key again to
erase the "-".
7. Press the [MENU] key several times to close the menu.
Waypoint 1
Waypoint 2
New course line
Waypoint 6
ROUTE LIST
LATITUDE LONGITUDE DISTANCE
-- --.---'N --- --.---'E
Waypoints window
7. NAVIGATION
Waypoint 3
Waypoint 4
Waypoint 5
PAGE 1/2
TTG
---.--nm -----.-H
7-11