Furuno GP-3500F-D Operator's Manual page 154

9. CUSTOMIZING YOUR UNIT
4. Press the [6] key to show the password window.
5. Operate the trackball and [ENTER] knob to enter a password.
The entered character is shown with asterisk.
6. Operate the trackball to select "END", and then press the [ENTER] knob.
7. Enter the password set at step 5.
8. Select "END", and then press the [ENTER] knob to return to the TEST &
MEMORY CLEAR menu.
Note 1: If the passwords entered at step 5 and 7 are different, an error
Note 2: When the [MENU] key is pressed before "END" is selected, the
9. Press the [MENU] key several times to close the menu.
Note: At the next power-up, you will be prompted to enter the password.
a) Enter your password. The characters are shown with an asterisk mark.
b) Select "END", and then press the [ENTER] knob.
When your password is correct, the password window disappears after
appearance of the message "PASSWORD IS ENTERED". If you enter an wrong
password, the message "THE PASSWORD WAS INVALID. ENTER
PASSWORD AGAIN." appears. Reenter your password.
9-38
A B C D E F G H I J K L M N O P Q R S T U V W X Y
Z , - ! ? / & = # _ 1 2 3 4 5
a b c d e f g h i j k
z _ _ _ _ _ _ _ _ _
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
message appears. Enter the correct password again.
TEST & MEMORY CLEAR menu appears. Enter password.
Enter it as follows:
6 7 8 9 0
l m n o p q r s t
_ _ _ _ _ _ _ _ _ _
Password window
END
_ _ _ _ _
u v w x y
_ _ _