Table of Contents
Advertisement
Height Rider/SP Series
Operating & Safety Instructions
2.1.19
Always check that the area below and around the platform is clear of personnel and obstructions
before lowering or slewing. Care should be taken when slewing out into areas where there may be
passing traffic. Use barriers to control traffic flow or prevent access to the machine.
2.1.20
Stunt driving and horseplay on or around the Niftylift shall not be permitted.
2.1.21
Where other moving equipment or vehicles are present, special precautions shall be taken to comply
with local ordinances or safety standards established for the work place. Warnings such as but not
limited to flags, roped-off areas, flashing lights, and barricades shall be used.
2.1.22
Before and during driving while the platform is elevated, the operator shall maintain a clear view of the
path of travel and maintain a safe distance from obstacles, debris, drop-offs, holes, depressions,
ramps, and other hazards to ensure safe elevated travel. Maintain a safe distance from overhead
obstacles.
2.1.23
Under all travel conditions the operator shall limit travel speed according to conditions of ground
surface, congestion, visibility, slope, location of personnel, and other factors causing hazards of
collision or injury to personnel.
2.1.24
The Niftylift shall not be driven on grades, side slopes, or ramps exceeding those for which it is rated
by the manufacturer.
2.1.25
It shall be the responsibility of the user to determine the hazard classification of any particular
atmosphere or location. Aerial platforms operated in hazardous locations shall be approved and
suitable for the duty (see ANSI/NFPA 505 where applicable).
2.1.26
The operator shall immediately report to his supervisor any potentially hazardous location(s)
(environment) which become evident during operation.
2.1.27
If an operator encounters any suspected malfunction of the Niftylift or any hazard or potentially unsafe
condition relating to capacity, intended use, or safe operation,theyshall cease operation of the Niftylift
and request further information as to safe operation from his management, or owner, dealer or
manufacturer before further operation of the Niftylift.
2.1.28
The operator shall report to his superior immediately any problems or malfunctions that become
evident during operation of the Niftylift. Any problems or malfunctions that affect the safety of
operation shall be repaired prior to continued use.
2.1.29
The boom and platform of the Niftylift shall not be used to jack the wheels off the ground.
2.1.30
The Niftylift shall not be used as a crane.
2.1.31
The Niftylift shall not be positioned against another object to steady the platform.
2.1.32
Care should be taken to prevent rope, electric cords, or hoses from becoming entangled in the aerial
platform.
2.1.33
Batteries shall be recharged in a well-ventilated area free of flame, sparks, or other sources of ignition
that may cause explosion. Highly explosive hydrogen gas is produced during the charging process.
2.1.34
When checking electrolyte levels, great care should be taken to protect eyes, skin, and clothing. Battery
acid is highly corrosive and the use of protective glasses and clothing is recommended.
2.1.35
If the platform or elevating assembly becomes caught, snagged, or otherwise prevented from normal
motion by an adjacent structure or other obstacle such that control reversal does not free the platform,
all personnel shall be removed from the platform safely before attempts are made to free the platform
using ground controls.
10
English/USA – 05/15
Original instructions
Advertisement
Table of Contents
