Table of Contents
Advertisement
Available languages
Available languages
6. Loosen the screws at the top corners of the
side access panel. Lower the access panel.
See Figure 24.
Figure 24
7. Remove the air plates.
Figure 25
8. Remove the nozzles.
Figure 26
Maintenance
9. Remove the crumb trays.
10. Clean the oven interior with an appropriate
oven cleaner safe for aluminum.
11. Soak the conveyor belt in a hot water deter-
gent mix in a 3 compartment sink or large con-
tainer. Keep the belt rolled when cleaning.
Rinse thoroughly and allow to drip dry before
installing.
12. Clean the conveyor supports, tunnel exten-
sions, crumb pans, nozzles, trays and air
paltes. Wash in a hot water, detergent mix.
Rinse with clean water. For difficult cleaning
areas, use a "heavy-duty degreaser" or oven
cleaner that is safe for aluminum.
13. Move the oven and clean under it. Be careful
not to damage oven's gas hose or electrical
cords when moving.
21
Cleaning
Figure 27
Advertisement
Table of Contents
