KROHNE 4000 Series Manual page 4

These terms may appear in this manual or on the device:
Warning statement: Identify conditions or practice that could result in injury or loss of life.
or
Caution statement: Identify conditions or practice that could result in damage to the instru-
ment or other property.
Disclaimer:
•
This document contains important information on the device. KROHNE attempts to be as
accurate and up-to-date as possible but assumes no responsibility for errors or omissions.
Nor does KROHNE make any commitment to update the information contained herein. This
manual and all other documents are subject to change without prior notice.
•
KROHNE will not be liable for any damage of any kind by using this device, including, but
not limited to: direct; indirect; incidental; punitive and consequential damages.
•
Any device purchased from KROHNE is warranted in accordance with the relevant product
documentation and our Terms and Conditions of Sale.
•
KROHNE reserves the right to alter the content of its documents, including this disclaimer
in any way, at any time, for any reason, without prior notification and will not be liable in any
way for possible consequences of such changes.
Product liability and Warranty
•
Responsibility for suitability and intended use of this device rests solely with the user.
Improper installation and operation of the device may lead to loss of warranty.
•
In addition, the Terms and Conditions of Sale are applicable and are the basis for the pur-
chase contract.
•
If a device needs to be returned to KROHNE, please note the information given at the back
of the Handbook. KROHNE regrets that they cannot repair or service a device unless
accompanied by the completed form
This instrument has been developed and manufactured by:
KROHNE Ltd
Rutherford Drive
Park Farm Industrial Estate
Wellingborough
Northants
NN8 6AE
United Kingdom
For information, maintenance or service, please contact your nearest local KROHNE represen-
tative.
See www.krohne.com
WARNING
No changes may be made to the devices. Unauthorized changes might affect the explosion
safety of the devices. Be sure to follow these instructions!
IMPORTANT
•
The prescriptions, regulations and electrical data described in the EC type examination cer-
tificate MUST be obeyed.
•
In addition to the general regulations for low-voltage installations (e.g.HD384) the regula-
tions laid down in the standard for electrical installations in gas hazardous areas (e.g.
IEC/EN 60079-14) or dust hazardous areas (e.g. IEC/EN 61241-14) MUST be complied with.
•
Installation, commissioning, utilization and maintenance must be carried out only by per-
sonnel trained in explosion safety.
•
This manual must be read in conjunction with the OPTIMASS / OPTIGAS Handbooks.
4