Adjusting Boat Trim - Yamaha F150 Owner's Manual

Operation
UP
1
DN
1. Power trim and tilt switch
UP
1
DN
1. Power trim and tilt switch (all engines)
2. Power trim and tilt switch (starboard side
engine)
3. Power trim and tilt switch (port side engine)
To raise the bow (trim-out), press the switch
" " (up).
To lower the bow (trim-in), press the switch
" " (down).
Make test runs with the trim set to different
angles to find the position that works best for
your boat and operating conditions.
62
DN
2 3
EMU27913

Adjusting boat trim

When the boat is on plane, a bow-up attitude
results in less drag, greater stability and effi-
ciency. This is generally when the keel line of
the boat is up about 3 to 5 degrees. With the
bow up, the boat may have a greater tenden-
cy to steer to one side or the other. Compen-
sate for this as you steer. When the bow of
the boat is down, it is easier to accelerate
from a standing start onto plane.
Bow Up
Too much trim-out puts the bow of the boat
too high in the water. Performance and econ-
omy are decreased because the hull of the
boat is pushing the water and there is more
air drag. Excessive trim-out can also cause
the propeller to ventilate, which reduces per-
formance further, and the boat may "por-
UP
poise" (hop in the water), which could throw
the operator and passengers overboard.