13241XX1
Technical Data
Operating pressure:
Recommended operating pressure:
Hot water temperature:
Rate of flow at 45 psi
Protection against back siphonage provided by check valves
in the hot and cold inlets and on the handshower outlet.
*Please know and follow all applicable local plumbing codes when
setting the temperature on the water heater.
Installation considerations
•
Large differences in pressure between the hot
and cold water supplies should be balanced
•
Flush the supplies thoroughly of building debris
before installing this unit.
•
The offset adapters included with this unit require
½" female fittings, recessed ³⁄₁₆" behind the
surface of the finished wall.
•
The high temperature limit stop may be reset to
comply with local plumbing codes.
•
To prevent scald injury, the maximum output tem-
perature of the shower valve must be no higher
2
13261XX1
max. 145 psi
14.5 - 72 psi
120° F - 140° F*
5.3 gpm
than 120º F. In Massachusetts, the maximum
output temperature can be no higher than 112º
F.
•
For use in Canada and the USA the mounted
handshower must be equipped with a non return
valve complying with ASME A112.18.3-2002
•
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required should it
be necessary to request warranty parts.