Table of Contents
Advertisement
Figure 77. Tightening the load arm screw
11. Install the processor air baffle as shown in Figure 78. Insert the edge of the baffle into the fan
support. Then, carefully press the baffle down into place.
Figure 78. Installing the processor air baffle
12. Lightly grip the system processor module that you replaced by the edges and lift it off the shipping
cover. Align the beveled corner of the module (A) to the corner of the tray with the triangle (B) and
place it in the tray, as shown in Figure 79 on page 69.
68
Power Systems: Servicing the IBM Power System LC921 (9006-12C)
Advertisement
Table of Contents
