Changing Device Ip Address - Dahua IPC-HF5541F-ZE-S3 Quick Start Manual

Step 9 Select Easy4ip or select Auto-check for updates as needed. If neither, leave them
unselected.
Step 10 Click OK to initialize the Camera.
Click the success icon ( ) or the failure icon (
Step 11 Click Finish.

2.2 Changing Device IP Address

● You can change IP address of one or multiple cameras at one time. This section is based on
changing IP addresses in batches.
● Changing IP addresses in batches is available only when the corresponding cameras have the
same login password.
Step 1 Follow Step1 to Step5 in "2.1 Initializing the Camera" to search for cameras on your
network segment.
After clicking Search Setting, enter the username and password, and make sure that they
are the same as what you set during initialization; otherwise there will be wrong password
notice.
Select the cameras whose IP addresses need to be modified, and then click Batch Modify
Step 2
IP.
Figure 2-3 Device initialization
7
) for the details.
Quick Start Guide