Introduction; Product Features - EuroLite LED PIX-72 User Manual

LED PIX-72 RGB Bar
DANGER! Electric shock caused by short-circuit
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires. Never open the housing. Keep the device away from rain and
moisture.
Please read these instructions carefully before using the product. They contain important
information for the correct use of the product.
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

INTRODUCTION

Thank you for having chosen one of our products. If you follow the instructions given in this manual, we are
sure that you will enjoy this device for a long period of time.

Product features

Bar (50 cm) with 72 wide beam RGB LEDs, 4 segments
• Equipped with 72 x 5050 SMD-LED in the colors red, green and blue
• 3, 5, 6, 12-1 or 12-2 DMX channels selectable
• DMX-controlled operation or stand-alone operation with Master/Slave function
• Addressing and setting via Control Board with LED display and four operating buttons
• Functions: Static colors, RGB color blend, internal programs, dimmer, strobe settings via DMX,
Master/Slave
• Subdivided into 4 pixels (illumination units with 18 LED each) which can be controlled individually via DMX
• Sound-control via built-in microphone, sensitivity adjustable via control board
• Locking possibility at the brackets
• IEC terminals for power linking up to 8 units
• Switch-mode power supply for operation between 100 and 240 volts
USER MANUAL
16/28 00135837, Version 1.0