Caring For The Sb-104 After Use - Nikon SB-104 Nikonos Manual

Caring for the 88-104 After Use
Wash the Speedlight with fresh water. ..
If the 88-104 8peedlight is stored without
having been washed after use under water
(especially in seawater), salt and other
foreign matter will stick to its parts,
possibly causing corrosion or operation
failures. With the 8peedlight's cap closed ,
wash the 8peedlight thoroug hly with fresh
water (do not use hot water). If the
8peedlight was used in salt water or
muddy places , submerge it in a sink or
other suitable
vessel
filled with fresh water,
and
move
all operating parts (such as
levers and knobs) to
remove
any salt or dirt
from the gaps around these parts . It is
then a good idea to rinse the 8peedlight
under running water.
Do not let water get into the sockets . . .
When washing the 8peed light, attach the
supplied sync socket cap to prevent water
from getting into the sync socket.
Drying the Speedlight . ..
When drying the 8peedlight after washing ,
do not subject it to flames or heat. Avoid
direct sunlight. Let it dry in a well-ventilated
area.
34