Camera Slave (Cordless Remote Photography) - Nikon SB-104 Nikonos Manual

I
Camera Slave (Cordless Remote Photography)
When used with the Nikonos RS,
the S8-104 can release the
camera's shutter upon being
activated from a remote location by
another Speedlight. The S8-104
detects the remote flash with its
built-in slave sensor, fires its flash
and releases the camera's shutter
simultaneously. This is useful when
you want to photograph hard-to-
approach or shy subject.
. Important
Use Speedlight S8·104 or S8·102 as the
flash activating unit. Camera Slave (cordless
remote photography) is possible only when
the S8·104 is used with the Nikonos RS.
1
Turn OFF the power switch on the
S8-104 connected to the Nikonos
RS, and set the function selector
to
[0]
"Cordless Remote:' Then
set the Flash mode to any desired
position.
-The function selector does not work
when the power switch is ON .
2
Set the Focus mode on the Nikonos
RS to "P" and set the distance in
advance. Then set the Sync mode
48
and Exposure mode to any desired
position.
-Autofocus operation is not possible for
Camera Slave (cordless remote
photography).
'~I
\
.~
/
\ V
\/ j
~\
/
.? \
I
o
~.((!]
O FFOI
o