Basic Operation; Attach The Sb-400 To The Camera; Adjust The Flash Head - Nikon SB-400 User Manual

Basic operation

1

Attach the SB-400 to the camera

En
2

Adjust the flash head

Horizontal
12
90º
75º
60º
1
Make sure the SB-400 and
the camera body are turned
off.
2
Rotate the mounting foot
lock lever to the left, slide
the SB-400's mounting foot
into the camera's accessory
shoe and turn the lock lever
to the right. (illust. A and B)
• In case the mounting foot lock lever
does not stay to the right and a red line
appears (illust. C), the mounting foot
lock lever is not fully rotated to its right
position. Re-attach the SB-400 to the
camera again with the same process
above.
1
Adjust the flash head to the
horizontal position.