Process Limits Screen - Husky Altanium Delta5 User Manual

User Guide

12.3 Process Limits Screen

Use the process Limits screen to set up the specification limits for each variable. When a
variable value is outside the lower or upper limits, the variable is considered out of
specification and triggers an alarm, a digital output, and/or the controller may stop.
To access the process Limits screen, do the steps that follow:
1.
2.
Figure 12-6
Process Limits Screen
On the Home screen, touch the Process Monitoring button.
Touch the Limits tag at the bottom of the screen.
The process Limits screen shows. Refer to
some settings are not seen in the figure. Refer to
settings.
Process Limits Screen
v 1.0 — February 2020
Figure 12-6. Because of the size of the screen,
Figure 12-7 to see all of the screen
Data Recording
163