Set The Timeframe; Set The Date And Time Range; Change The Date And Time Range Old; Change The Date And Time Range New - Husky Altanium Delta5 User Manual

User Guide
Table 12-2
Midline
Variable Selection
Button
Value

12.2.2 Set the Timeframe

You can select a timeframe for the curves in 1, 2, 4, 8, or 12 hour increments. The default
timeframe is 4 hours.
When the timeframe is changed, the system automatically updates the new start date and
time range. The old date and time range will not change.
To change the timeframe, do the steps that follow:
1.
2.
3.
4.

12.2.3 Set the Date and Time Range

You can select a date range for the curves. The default Old date is the New date value minus
the Timeframe value. The default end date is the current date and time.
The Old and New date and time range fields are identified in

12.2.3.1 Change the Date and Time Range Old

Touch the Old date and time range field, enter the date and time in the Old dialog window
that shows, and then touch the Accept button.
If the calculated Date Range End value is later than the current system time, the Old Date
value is adjusted automatically to maintain the Timeframe value.

12.2.3.2 Change the Date and Time Range New

Touch the New date and time range field, enter the date and time in the New dialog window
that shows, and then touch the Accept button.
The date and time range New change automatically updates the date and time range Old, by
the current timeframe duration.
NOTE:
Set the Timeframe
History Plot Screen Curve Data Descriptions (Continued)
Screen Element
The midline is the middle value of the curve.
For example, (540 + (-90)) / 2 = 225).
Touch the button next to the process variable name to select a process
parameter to see.
X Axis value reflects the value of the parameter selected at a specific
moment in time.
On the Home screen, touch the Process Monitoring button.
Touch the History Plot tab.
On the History Plot screen, touch the Timeframe field. Refer to
Touch a timeframe (1, 2, 4, 8, or 12) to select it.
The date and time cannot be changed to a value later than the current system time.
v 1.0 — February 2020
Description
Figure 12-3.
Figure 12-3.
Data Recording
161