Table of Contents
Advertisement
3. First Use
3.1 Accessories Connection
Before putting the router into operation, make sure to connect all the components required for running
your applications. Refer to Chapter
card for the cellular connection as explained in Chapter 2.1.
Ensure you do not operate the router without an antenna connected to the main antenna connector.
Transmitting energy is effectively reflected by the open end, which could potentially damage the
equipment.
3.2 Router Configuration
You can perform the initial configuration of the router using a web browser on your PC. This interface
allows for router monitoring, configuration, and administration.
Begin by connecting the power supply to the router (refer to Chapter 2.4). The router will initiate its boot
process. By default, the router will automatically establish a connection to the default Access Point Name
(APN) of the inserted SIM card. Ensure your PC is configured to obtain IP settings automatically from the
network. Connect your PC's network card to the default LAN interface of the router, Ethernet port ETH0.
The DHCP server will assign an IP address to your PC.
To access the router's web interface, enter the following address in your web browser:
1.1
. Please note that using the HTTPS protocol for secure communication over the network is mandatory.
There is just the root user account created on the router by default. Check the product label on
the router for the default password
corresponding password. Successful login grants access to the router's web interface. Consult the router
Configuration Manual
After logging on to the device for the first time, we strongly recommend changing the default password
due to security reasons.
For security reasons, we recommend regularly updating the router's firmware to the latest version.
Downgrading the firmware to an older version than the production version or uploading firmware
intended for a different device may cause the device's malfunction.
All routers have the WebAccess/DMP client pre-installed by default. The activated client periodically
uploads router identifiers and configuration to the WebAccess/DMP server. See the configuration
manual [1], chapter Basic Information -> WebAccess/DMP Configuration, for more information.
If the router's label lacks a unique password, use the password root .
1
ICR-2734 Hardware Manual (preliminary version)
1.3
for an overview of the hardware. Also, remember to insert a SIM
Access the web interface by logging in with the root user and the
1
[1]
for detailed descriptions and examples of router configuration.
https://192.168.
23
Advertisement
Table of Contents
