Download Print this page
Advantech ICR-2031 Start Manual
Hide thumbs Also See for ICR-2031:

Advertisement

Quick Links

Start Guide
ICR-2031, ICR-2431, ICR-2432,
ICR-2531, ICR-2631
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de

Advertisement

loading

Summary of Contents for Advantech ICR-2031

  • Page 1 Start Guide ICR-2031, ICR-2431, ICR-2432, ICR-2531, ICR-2631 LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de...
  • Page 2: Safety Instructions

    Start Guide Safety Instructions Please take care to following instructions: Use the router in compliance with national and international law and in compliance with any special or additional restrictions regulating the use of the router in the various appli- cations and environments. To avoid possible injury and/or damage to the device, observe the relevant provisions and standards.
  • Page 3: Product Disposal Instructions

    flash drive medium. If you are interested in obtaining the source, please contact us at: techSupport@advantech-bb.com Modifications and debugging of LGPL-linked executables: The manufacturer of the device hereby grants the right to use debugging techniques (e.g.
  • Page 4: First Use

    Start Guide First Use Before applying power to the router, connect all the components that you need for your applications. Do not run the router without an antenna connected to the main antenna connector as the energy from the transmission is effectively reflected by the open end and can damage the equipment.
  • Page 5 Start Guide 2. SIM Card The SIM card reader for one or two, depending on the product type, Micro SIM cards (3FF with size of 15.0 x 12.0 x 0.76 mm) is located on the right panel of the router under a metal cover.
  • Page 6 Start Guide 3. Power The router requires an external DC power supply. The DC voltage required is between +9 and +48 V DC. The router has built-in protection against reverse polarity without signaling. Connect the power supply cable to the PWR connector on the left panel of the router (see the figure below) and tighten the locking screws.
  • Page 7 Start Guide Configuration 1. Configuring the Device Using the Web Browser You can use a web browser running on your PC to get access to the router web interface. Here you can perform router monitoring, configuration, and administration. First, connect the PC to the default LAN interface as described in the Ethernet chapter.
  • Page 8 Hereby, Advantech Czech s.r.o. declares that the radio equipment type ICR-2031, ICR-2431, ICR-2432, ICR-2531 and ICR-2631 is in compliance with Direc- tive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.advantech-bb.cz/eudoc...

This manual is also suitable for:

Icr-2431Icr-2432Icr-2531Icr-2631